Porsche Engine and Gearbox Rebuilding

Our team of highly skilled technicians have been providing Porsche engine and gearbox rebuilds in our Workshop for over 30 years. 

When it comes to engine and gearbox rebuilds for Porsche vehicles, our team are second to none. At our workshop in Liverpool, our highly skilled technicians use Porsche approved parts to get your engine back up and running again. Before getting started, we always offer a consultation to ensure that the rebuild is suited to meet your needs. After that, we are ready to go.

Take the Next Step to Levelling Up Your Engine

Why Rebuild your Porsche Engine?

There are two reasons why Porsche drivers choose to rebuild their engines: performance upgrades or technical issues.

Keeping your vehicle well maintained with regular Porsche servicing should go without saying, but part of the joy of owning these vehicles is to improve them over the years, fine-tuning the various systems and untapping their true potential. These upgrades don’t always come at a huge cost. Relatively speaking, extra performance can often be awarded to those willing to make small investments. Capacity increases and cam swaps are two such upgrades which can lead to good improvements, especially if the existing parts are worn or a little damaged.

Technical issues are something that every vehicle will come up against at some point in their lifespans, and Porsches are no exception. Aircooled engines (which were fitted in all 911s up to 1998) can suffer from valve guide wear, due to the heat that’s produced by the system. Vehicles that are used for commuting or only travel short distances at a time can be susceptible to this issue which is manifested as smoking on startup.

Vehicles that have been stood for a while can also develop this issue, which requires a top-end strip, new guides, check and measure of valves for wear, and recut the valve seats in the cylinder heads to ensure optimal sealing. A top-end refresh can return factory fresh performance, as leaking guides and worn piston rings can dilute the combustion mixture, leading to poor performance

Whether you’re looking for a boost to your track performance, or are trying to keep your classic Porsche in the best condition possible, our workshop is staffed with seasoned Porsche mechanics who have the skills to complete the work to the tee.

Why Choose Tech-9 Motorsport?

Tech 9 are Porsche engine rebuild specialists who have been rebuilding all models of Porsche engines for close to 30 Years. Our highly experienced technicians have worked on a comprehensive range of these vehicles, including pre-1998 air-cooled engines and water-cooled systems. We’re Porsche tuning experts and have upgraded some interesting models over the years, including race and road variants of the GT3 models and 356 models, through to all the air-cooled 911 variants including 964 and 993.

We can offer a full vehicle diagnostic, running you through the entire breadth of your vehicle’s systems, so that you’re completely informed on how your vehicle is running. With this information, we can recommend the best course of action and get to work on your Porsche.

We only use genuine Porsche or Porsche approved parts. Many of our bespoke parts are made by our trusted suppliers for performance enhancement. Con-rods, pistons, valves, cylinder heads, valve train components and cams are just a few of the items we can order for you.

What is Your Engine Rebuild Process?

Almost every engine rebuild is different, but our overall process is a good guide to how we work with our customers’ vehicles. In every case, we’ll be sure to keep you informed about the progress and meticulously document the engine rebuild with photographs and tolerance record sheet.

  • An initial consultation will determine future use, budget and specification to be achieved.
  • We require an initial deposit upon instruction (normally 30%), then depending upon the build, we can take stage payments or balance on completion. There are also finance options available for high budget builds if required.
  • If the vehicle is present for the rebuild, we like to carry out the ‘bedding-in’ procedure in-house. This would entail running in oil installed, and we then drive the vehicle 800-1200 miles to ensure optimal performance and the engine has the care and attention for future durability.
  • Once the running-in period has elapsed, we would refill the oil, and depending on the model, carry out a valve clearance check and reset.
  • For engines presented without the vehicle, again subject to model type, we have an engine testbed that can be used for basic tune and setup, ignition timing, fuelling and basic bedding in.

What Porsche Engine Rebuilds do you Offer?

Top end refresh

This should be considered a partial rebuild, as both crankcase and crankshaft are left together. Minor issues such as oil leaks, valvetrain wear and snapped head studs can be fixed at a relatively small cost. Depending on the model, we can also include bore inspections and piston ring replacements.

Stock Rebuild

Our stock rebuild is a comprehensive rebuild of the engine. We’ll completely strip down the engine and then meticulously assess the condition of all the parts. After cleaning these down, we’ll rebuild your engine with brand new OEM bearings, seals, gaskets, piston rings, chains and belts – giving your Porsche a completely new lease of life.

Upgraded Rebuild

We’ve worked with enough of these vehicles to understand their weak points and where they have room for improvements. Our technicians can completely rebuild your engine with a host of modifications that reinforce weak areas and increase power output. If you’re looking to future-proof your vehicle whilst squeezing it for extra performance, then this is the option for you.

Custom Rebuild

We’re yet to meet a Porsche owner who doesn’t have a dream custom build in their mind. Our specialist mechanics can make those dreams a reality and have years of experience creating bespoke Porsche builds, whether it’s an 8500rpm 2.0 901 race – engine, a 1000bhp 997 Turbo, or increasing your 356’s capacity to 2.1 litres. We can work with you to create an engine that is perfectly tailored to your specifications and requirements!

How Much Does an Engine Rebuild Cost?

Each of our engine rebuilds are bespoke, with customers requiring different specifications for their build. This means that the price of our service can vary from customer to customer. A price quote will take into consideration time of labour, parts and machinery services, removal and refitting of the engine. Labour rate is priced at £79 p/hour and a rebuild.

Our engine rebuild services typically range from £8,000 to £25,000, depending on the complexity of the work involved and the specific requirements of your vehicle. Here’s a breakdown of our estimated costs for various engine rebuild scenarios:

  • Air-cooled top end rebuild: £8,000-£10,000.
  • Full engine rebuild: Starting from £12,000, with the potential for additional costs if piston/cylinder replacement or other repairs are necessary.
  • 964 or 993 engine upgrade with new Mahle 102mm pistons/cylinders for a 3.8 liter engine, including sport camshafts, running-in, and dyno tune: £25,000.
  • Water-cooled 996 or 997 engine rebuild with bore scoring repair and complete engine overhaul: £13,000-£15,000.

Do you want a price quote for your engine rebuild project? Fill in the form at the top of the page, and we’ll get back to you!

See Our Customer Reviews


We provide a 12-month warranty on all of our engine rebuilds covering oil-leaks and failures (not including crank or con-rod failures on top-end refreshes).

Get in touch with us using the contact form, or give us a call on 0151 4255 911 to find out more.

The cost to rebuild a Porsche engine varies in price according to the type of rebuild being undertaken, the parts involved and the labour taken to complete the work. For example, once the engine is removed from an air-cooled 911, a top-end rebuild would typically take us 18-21 days to complete, whereas a full build would take closer to 30 days. Just as every Porsche is its own beast, all our rebuilds are individually quoted. Our labour rate ranges from £79 + VAT p/hour.

Tech 9 have spent 30 years working with a full range of these vehicles, from classic Porsche restorations to modern gems. Thanks to this experience we have a unique insight into the issues that sometimes crop up with these vehicles and are always able to provide an effective solution.

We’ve performed complete rebuilds for the most iconic classics, including the Porsche 356A, B, and C/912. We know all the various faults with these older models, including the very common engine case ovality that can be repaired by our engineering partners. Tech 9 have experience performing routine rebuilds to performance-orientated specifications with increased capacity, sport camshaft and performance exhaust.

Our racing background also makes us uniquely suited to work on high-performance vehicles. We’ve rebuilt 901 2.0 race engines with Solex Carburettors for the Peter Auto 2.0L Cup series, 911 MFI engines, RSR 3.0-3.6 and high compression 3.0 SC-based engines with 300+bhp regularly achieved.

Some of the other Porsche models we have worked with include:

Porsche 911, Porsche 356, Porsche Boxster, Porsche 912, Porsche 993, Porsche 912, Porsche 996, Porsche 997, Porsche 964, Porsche 356, Porsche 914, Porsche 944, Porsche Cayenne, Porsche 2.7, Porsche 3.2, Porsche 356, Porsche 911 3.2, Porsche 911, Porsche 911 Turbo, Porsche 914, Porsche 924, Porsche 928, Porsche 944, Porsche 944 S2, Porsche 944 Turbo, Porsche 964, Porsche 968, Porsche 987, Porsche 993, Porsche 996, Porsche 997 3.8, Porsche Boxster, Porsche Boxster S, Porsche Cayenne, Porsche Cayman, Porsche M97, 1983 Porsche 944, 1988 Porsche 911, 1999 Porsche 911, 1999 Porsche Boxster, 2001 Porsche 911, Porsche 911, Porsche 2.5, Porsche 2.7, Porsche 911 2.7, Porsche 911 930 Turbo, Porsche 912, Porsche 928 S4, Porsche 944 2.5, Porsche 964 Turbo, Porsche 986, Porsche 993 Turbo, Porsche 996 3.6, Porsche Boxster 986, Porsche Boxster 987, Porsche Carrera 3.2, Porsche Cayman 3.4, Porsche Cayman, Porsche Cayman S, Porsche 3.8, Porsche 400hp 3.6

We have many bespoke Porsche parts & accessories that have been designed by us with our world-class machining partners, such as connecting rods, pistons, camshafts and bespoke exhaust systems. We can order in components specific to your needs, whether you’re racing on the circuit, rallying or taking part in an endurance event. We also have a large stock of spares to keep these engines on the road. If you’re struggling find a part that is no longer available, chances are that we have it!

We use all the factory specific tools required for rebuilding these Porsche engines, one of our secrets of performance in our builds relates to the digital timing equipment that is used for cam timing. This vital piece of equipment ensures accuracy across the cylinders for optimal efficiency. Balancing combustion chambers for volume matching, and careful attention to Compression Ratio (CR) ensures that a Tech 9 engine delivers the desired performance and reliability.

Generally, most of our engine rebuilds are a six-week process, from removal from the vehicle to re-fitting. There are various factors that can elongate the process, such as the bedding in period and potential rolling road tuning, if there are any upgrades involved. Contact us to find out more about how long your individual case may take.

There are a few things you should look out for, which are common indicators that your engine needs to be repaired or replaced including oil leaks, smoking or rattles on start-up.

However, a lot of clients visit us for engine rebuilds to enhance their driving performance on the road, with higher quality components, or performance-optimised parts.